04-21-2019, 10:14 AM
my fuel pump page shows how to do all that as does the manual on the CAR FSM
you did one of 5 tests,. the shunt test a pump man (water?) would call it a dead head test.
60 PSI is normal 70 mean the pump is very strong, and no leaks in the in tank hoses.
seaflom is snake oil never use that.
the key on pressure or idling is ,34 to 41 PSI and is Altitude base ONLY) G16: TBI pressures
see the factory pages, see the drawing with the pressure gauge on the filter banjo screw, 6mm thread, maybe your filter is NOT STOCK ? IDK
http://www.fixkick.com/INJECTORS/pump.html
you did one of 5 tests,. the shunt test a pump man (water?) would call it a dead head test.
60 PSI is normal 70 mean the pump is very strong, and no leaks in the in tank hoses.
seaflom is snake oil never use that.
the key on pressure or idling is ,34 to 41 PSI and is Altitude base ONLY) G16: TBI pressures
see the factory pages, see the drawing with the pressure gauge on the filter banjo screw, 6mm thread, maybe your filter is NOT STOCK ? IDK
http://www.fixkick.com/INJECTORS/pump.html
http://www.fixkick.com