R&R fuel pump 93 4door sidekick

[fixkick]

Hello
some here did that and even showed photo's and measurements
id just jack up just the rear right side if car, keeping left rear tire on ground , lets body go up and tire stay low
then look at the top of tank, or remove left rear tire
now see that pump ring mount?
using chock mark side of tank there, L/R line .
the do so at rear of tank, now measure those to inside car. X marks the spot.
the best way is tank out, cut it for next time, or drill hole there dead center, and plug it for next time.
projecting lines is not easy. lots of work, more than dropping tank. once drained.

one more way, after chocking tank, is to drill tiny holes on front of tank at body. slop (under car laying there)
that gets CL (center line F/R)
then with same chock marks, on side of tank, drill tiny hole in body, now you have X , Y, holes, and they cross a the center of pump rack.

I want to replace fuel pump without removing the tank.
Need location of pump in tank to cut access hole into rear deck.
Thanks I hope!

---

here is my 2door
the top if tank is in full view here, so you can mark it all up easy (pretty easy) for protections to body.
i cleaned it up with engine cleaner soaks to get it all super clean, as you dont want dirt in tank, easy to do your way....