Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Need O2 sensor P/N
#2
best i can tell for such a small photos and blurry
its a short header, with 3 studs.
and those had a 4 wire harness plug (female) '

does yours?
engine swaps, header swaps and more, can confuse all this. so I use the harness as the KEY factor. (ECU is really, the final say)




http://www.fixkick.com/sensors/OxyGen_se...#oxy-parts
i even made a full bosch matrix table above., before they wrecked there sensor page.

NGK shows your p/n and 1 more.
http://www.partcat.com/ngk

that denso number is 4wire,

that NGK is listed as 3 wire, and is not used in 1992, the 94 year, yes, on the fed long header,


you must know that Suzuki uses same VIN engine codes for 4 engines, 8v 16v and fed and calif sensros. 4 types.
so all stores get this wrong.
the cure is reading real CATALOGs from bosch , NGK,

the correct 02 is 13073 (bosch)

on my same page is the Denso. xxx 4060 like you found.


that NGK catalog, wow what tricky bugger
soft-top means 8v.
hard top means 16v, (silly idea that ,soft/hard...)

so the 16v must be. 24617 but hark, the say in the spec, its 3 wire, and that is wrong.
not easy that.

why not just buy bosch./?
they work and we know the numbers and are on sale all over.
http://www.ebay.com/sch/i.html?_from=R40...r&_sacat=0


that being said.
the 3wire sensor works ok on the 4 wire car harness, and will have a weak ground (the whole reason 4 wire works best)
but not the other way, 4 oxy to a 3 wire harness.

so what's on your harness.


the other oddity is sellers thinking 2 door cars have no 16v engines until 1996. (they are more rare but were sold , all over earth)

the 4 wire has and extra ground that uses the ECUs special ground for 100% accurate readings at all times, not using rusty manifolds for connections...
http://www.fixkick.com
Reply


Messages In This Thread
Need O2 sensor P/N - by Azplinker - 12-18-2015, 07:49 AM
RE: Need O2 sensor P/N - by fixkick - 12-18-2015, 09:29 AM
RE: Need O2 sensor P/N - by Azplinker - 12-18-2015, 09:53 AM
RE: Need O2 sensor P/N - by fixkick - 12-18-2015, 10:50 AM
RE: Need O2 sensor P/N - by Azplinker - 12-18-2015, 03:49 PM
RE: Need O2 sensor P/N - by fixkick - 12-18-2015, 10:24 PM
RE: Need O2 sensor P/N - by Azplinker - 12-19-2015, 12:50 AM
RE: Need O2 sensor P/N - by fixkick - 12-19-2015, 01:26 AM
RE: Need O2 sensor P/N - by Azplinker - 12-19-2015, 02:11 AM
RE: Need O2 sensor P/N - by fixkick - 12-19-2015, 02:22 AM
RE: Need O2 sensor P/N - by Azplinker - 12-19-2015, 10:41 AM
RE: Need O2 sensor P/N - by fixkick - 12-19-2015, 11:08 PM
RE: Need O2 sensor P/N - by fixkick - 12-20-2015, 02:01 AM
RE: Need O2 sensor P/N - by fixkick - 12-21-2015, 12:15 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)