Login Register
Car Repair Forum › Suzuki › Sidekick/Tracker v
Need O2 sensor P/N

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Need O2 sensor P/N
Azplinker Offline
Junior Member
**
Posts: 45
Threads: 14
Joined: Apr 2014
Reputation: 0
#1
12-18-2015, 07:49 AM (This post was last modified: 12-18-2015, 09:23 AM by Azplinker.)
Hi Fixkick,
I need confirmation that I have chosen the correct three-wire O2 sensor for my car. It's a 1992 Suzuki Sidekick, 4dr, automatic, 4WD, 1.6L, 16V, Here are the two sensors I picked out from Rockauto:
DENSO 2344060
NTK 24617
I attached a photo of the Exhaust manifold, It's a short one with the separate double downpipe section to the catalytic converter.

Also need to know if these other photos show a collapsed lower pipe or is this normal?


Attached Files Thumbnail(s)
           
1992 Sidekick, 4 door, 4-spd automatic, 1.6 L, 16 V, MPI
Find
Reply


Messages In This Thread
Need O2 sensor P/N - by Azplinker - 12-18-2015, 07:49 AM
RE: Need O2 sensor P/N - by fixkick - 12-18-2015, 09:29 AM
RE: Need O2 sensor P/N - by Azplinker - 12-18-2015, 09:53 AM
RE: Need O2 sensor P/N - by fixkick - 12-18-2015, 10:50 AM
RE: Need O2 sensor P/N - by Azplinker - 12-18-2015, 03:49 PM
RE: Need O2 sensor P/N - by fixkick - 12-18-2015, 10:24 PM
RE: Need O2 sensor P/N - by Azplinker - 12-19-2015, 12:50 AM
RE: Need O2 sensor P/N - by fixkick - 12-19-2015, 01:26 AM
RE: Need O2 sensor P/N - by Azplinker - 12-19-2015, 02:11 AM
RE: Need O2 sensor P/N - by fixkick - 12-19-2015, 02:22 AM
RE: Need O2 sensor P/N - by Azplinker - 12-19-2015, 10:41 AM
RE: Need O2 sensor P/N - by fixkick - 12-19-2015, 11:08 PM
RE: Need O2 sensor P/N - by fixkick - 12-20-2015, 02:01 AM
RE: Need O2 sensor P/N - by fixkick - 12-21-2015, 12:15 AM

Forum Jump:


Users browsing this thread: 4 Guest(s)