Scratched up Head

[fixkick]

your spec compression is 180PSI in Altlanta , 1000 feet high (.97 or 97% adjusted to elevation)

the first time you touch any G16 engine, we remove that 17mm headed bolt, and look
if not , nothing but pain awaits......
the new spec( retroactive all years 89-98) is 94ft/bls, the TSB is even on my tbelt page to read, there real TSB.
http://www.fixkick.com/All-Pdfs/TSB/89-96crank-bolt.pdf
many cars with A/T box are to lazy to lock the crank and set the torque to spec, nor even read TSB at all , (rule one working any car is that)
then the key is wrecked.
http://www.fixkick.com/t-belt/damage/index.html


if lash is good, the cam is timed wrong, why or how is the only question.
or the gauge is busted. ?
100PSI is dead dead wrong. no matter location in USA,
up here, sure