04-10-2019, 02:48 PM
(This post was last modified: 04-10-2019, 02:57 PM by CSUSBgeochem1.)
I think i have been going about this all wrong. the crank sensor also detects misfire and there are a few things i think might be contributing to this so i need to clear those up. i need to make sure there are no causes that would contribute to misfire and everything is running correctly.
Temp 180
I will take a vacuum gauge to it and see whats going on with that.
I will get the freeze data off my obd2 scanner and post that for you to see.
The exhaust manifold is severly cracked and needs replaced. same with the oxygen sensors but i will test those to be sure.
Temp 180
I will take a vacuum gauge to it and see whats going on with that.
I will get the freeze data off my obd2 scanner and post that for you to see.
The exhaust manifold is severly cracked and needs replaced. same with the oxygen sensors but i will test those to be sure.