Parts needed to run ECU

[jimlindenfelser]

Ok I have pretty much asked this before but would like more info. I have 16v engine from a 92 Suzuki Sidekick 4 door and manual trans. I would like to know what I would need parts wise to use the 33920-70EA0 ECU which is much cheaper and plentifull than the 33920-58B30. Parts are cheap at my local pull and save. I know I would need the IAT. Also the intake manifold and Plenum with the EGR tube. EGR the same? The throttle body the same? What else am I missing?

Thanks,

Jim