Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
TH180 - Cable to Connect to Throttle
#10
sure just cut the mount and extend it with steel plate weld back to where this is some slack.
I agree, seems like you have all figured out, thanks for sharing.
and the shared, links . love those !

(12-01-2018, 03:09 AM)redline814 Wrote: Reaches the mount...but I would prefer there be more slack. I had to pull it fairly tight. I might make a different bracket. One that moved the bottom cable mount a few inches back. That way I may not have to worry about the wire connector getting wound up in the sheath. I already ordered the motorcycle parts you mentioned to complete the job!

I will weld an extension on the existing plate and move it back.

BTW - Here is the detail of replacing the cable (lots of pictures). https://www.pirate4x4.com/forum/suzuki/2...floor.html
http://www.fixkick.com
Reply


Messages In This Thread
RE: TH180 - Cable to Connect to Throttle - by fixkick - 12-01-2018, 05:18 AM

Forum Jump:


Users browsing this thread: 3 Guest(s)