Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
'98 16v timing problem
#2
Hi Rangerscott, see the picture below of my 96 Tracker 16v. This picture shows my distributor timed 5 degrees btdc at 800 rpm (idle) and warm engine. I timed it with the timing freeze jumper in place. I am not 100% what you mean by "to align with the post"

http://www.youtube.com/watch?v=Q1y3_E1jKbo

When I took this picture, cylinder #1 is firing. This means that the crank pulley's notch is lining up with the 0 mark on the plastic timing belt cover and the camshaft pulley's outer "E" mark is pointing at 6:00 o'clock (not 12 o'clock)

I hope this helps at least to give you a reference point. I am assuming our engines are the same.

gorkyb


Attached Files Thumbnail(s)
   
1996 Geo Tracker, CAMI, 16 valve, 5sp, 4x4, soft top, 2 door, no a/c
Reply


Messages In This Thread
'98 16v timing problem - by Rangerscott - 04-29-2013, 08:08 AM
RE: '98 16v timing problem - by gorkyb - 04-29-2013, 09:28 AM
RE: '98 16v timing problem - by Rangerscott - 04-29-2013, 11:21 AM
RE: '98 16v timing problem - by fixkick - 04-30-2013, 07:45 AM
RE: '98 16v timing problem - by Rangerscott - 04-30-2013, 07:59 AM
RE: '98 16v timing problem - by fixkick - 04-30-2013, 09:13 AM
RE: '98 16v timing problem - by Rangerscott - 04-30-2013, 11:35 AM
RE: '98 16v timing problem - by fixkick - 04-30-2013, 11:29 PM
RE: '98 16v timing problem - by Rangerscott - 05-01-2013, 12:19 AM
RE: '98 16v timing problem - by fixkick - 05-01-2013, 12:47 AM
RE: '98 16v timing problem - by fixkick - 05-01-2013, 01:55 AM
RE: '98 16v timing problem - by Rangerscott - 05-03-2013, 09:51 AM
RE: '98 16v timing problem - by Rangerscott - 05-05-2013, 04:45 AM
RE: '98 16v timing problem - by gorkyb - 05-05-2013, 06:22 AM
RE: '98 16v timing problem - by fixkick - 05-05-2013, 06:54 AM
RE: '98 16v timing problem - by TRACKERHACKER - 05-07-2013, 09:53 PM
RE: '98 16v timing problem - by fixkick - 05-07-2013, 11:47 PM
RE: '98 16v timing problem - by Rangerscott - 06-30-2013, 12:36 AM
RE: '98 16v timing problem - by fixkick - 06-30-2013, 03:11 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)