01-07-2014, 06:52 AM
One problem solved. Sprayed butterfly area with cleaner and sticky throttle went away in 2 days.
Maybe another success. Unplugged and reconnected TPS. Slow idle response to load seems to have gotten better or gone away.
Didn't see any corrosion in connector. Installed new up stream O2 sensor at same time.
Where do I pick up a tach signal to check idle speed?
Maybe another success. Unplugged and reconnected TPS. Slow idle response to load seems to have gotten better or gone away.
Didn't see any corrosion in connector. Installed new up stream O2 sensor at same time.
Where do I pick up a tach signal to check idle speed?
(01-05-2014, 05:45 AM)fixkick Wrote: yes, make sure both cables are set tad slack, per fsm, or bad idle will happen
and the 0.5v rule.
make sure the TB TV valve. drops to zero clearance at the stop screw each time. the screw is factory set. its set for 99.9% closed, so it cant jam ever. The ISC and bleed set hot idle.