Esteem 1.6 16valve first start and run

[fixkick]

btw, thanks for sharing your videos, very fun to watch and hear kid talk, cute.
it sounds good, no misfire cold , that is good.
on all engines like this, (stripped down)
the engine must get hot, 180f this is first.
fuel pressure at spec, (FPR rules)
no missing sensors that would cause OBD2 to go to (grenade mode! ) that one guy here (LOL) calls failsafe (Limp home ) mode.
the list is here.
and not causing closed loop TRIM to fail. (dead 02 front B1S1)
MAF = P0102/103
IAT = P0112/113
ECT = P0117/118
TPS = P112/123

the transmission has its own failsafe, (skips gears- 2nd?) not related to engine, fueling .
for
VSS1 = P0500 ( speedo vss) Vehicle Speed sensor = VSS
TR = P0705 (A/T Range shifter output in conflict)
VSS2 = P0720 ( 4sp Vss tail speed sensor dead)
SS#1 = P0753 (shift solenoid 1 bad)
SS#2 = P0758 (shift solenoid 2 bad)
TCC = P0743 (torque converter clutch malf)


the scan tool has this screen called, MONITORS RUN OUT, this screen tells you if all monitors are complete, if not , many tests and errors are not complete yet.
That is why the smog stations fails you with CEL on, or if monitors not RUN OUT,( means completed)
and is the best way to see if all is Okay.