Login Register

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2.3 DOHC motor - correct operating temp
#50
LAST CVS LOOKS GOOD, AT KEY OFF 0RPM IS SEE THE BLOCK heat soaked up to 255F , that is super hot. Hot soak temp.
the EFI runs in code 2 , full time expected, so the 02 is happy at , mid point, of its range. all good... no lean that.
I seen no problems in the data just very hot ECT sensor. and the OBD voltage glitches to 9v, line 259 /262 there very odd, beside key off at line 426.
at 39.2 load on engine looks perfect, but hot.
http://www.fixkick.com
Reply


Messages In This Thread
RE: 2.3 DOHC motor - correct operating temp - by fixkick - 08-03-2019, 06:03 AM

Forum Jump:


Users browsing this thread: 4 Guest(s)