06-06-2019, 06:22 AM
I was able to find a few caps laying around that were good to throw in. One of the caps on the ECU did in fact leak and you can see the green on the bottom of it. I decided to change all barrel type caps as they were all bad. I included a picture showing them all. I popped the computer back in and still get the code. It starts up no issue. I have cleared the code several times just to watch it pop up either immediately or in less than a minute running. Im leaning on that shim being the issue.
There is someone down here selling a whole motor for the same year, but off a sidekick. I might swipe it because it is just a drop in but its more than i really need. If it comes with the manifold i might be more inclined. Sadly there is no way of knowing if there is the same issue with that motor.....
seems everyone only sells long blocks and i just need a short block...
There is someone down here selling a whole motor for the same year, but off a sidekick. I might swipe it because it is just a drop in but its more than i really need. If it comes with the manifold i might be more inclined. Sadly there is no way of knowing if there is the same issue with that motor.....
seems everyone only sells long blocks and i just need a short block...