05-29-2019, 03:24 PM
At the plug i left a good portion of the wire that came with the new plug attached and used aluminium tape to wind up the two wires.
i left the ground wire outside that aluminum tape and extended it with a small piece of copper wire all the way to the end of the plug.
i wound it around the aluminum taped core. I then used electrical tape to seal it all up. You can see from the picture it made the line wide but in the end it worked great.
i left the ground wire outside that aluminum tape and extended it with a small piece of copper wire all the way to the end of the plug.
i wound it around the aluminum taped core. I then used electrical tape to seal it all up. You can see from the picture it made the line wide but in the end it worked great.