04-07-2019, 10:53 AM
So the new distributor arived today, it was a cheap part to throw at this but i figured i would try. Still get the code. The old one was in bad condition anyway but i figured out that you CAN rebuilt them. Not sure why the parts are not available. I do see the sheathing on mine but there is nothing around to create signal were the sheathing is not on it. I looked all over for where it might be grounded in the engine bay and near the ecu but i cant find anything that looks like it. The harness was ran right over the alternator so i moved that so its not near it. Thought this might fix the problem but it did not. My next move is the run new wire and then i am all out of ideas aside from replacing the ECU.