the codes, i think no
but there are lots of 4wd drive part not just a box.
crossmembers. and more. prop shaft front, and new rear.
harness issues, sure.
finding x90 parts is not easy. nor cheap if found.
engine mount and cross member, not the same 4wd
frame is not the same -79e10 = 2wd, frame 79e00 = 4wd, not the same and mounts on it very different.
the transfer case needs to match 96+
the 5speed gear box is not close to same (gears yes, but not much else inside, even shift rails not the same nor output shaft) so 4wd box is needed
and the new rear prop shaft from xfr case to rear
and the new transmission mounts. 4wd,
and the now very rare 4wd front hubs wheel bearing hubs. (or with ABS?)
good luck finding those hubs. (gm has the for huge money)
may key parts not sold by suzuki now,. discontinued..
a front axle main
a front CV axles (easy 3rd party makers)
4wd harnesses (lots of options lots of harnesses there are)
front locking hubs. (axle ends)
some cars with 96+ autotransmission, with missing 4wd switch will not shift right TCM in 96 or PCM newer but is easy to wire up, the switch is there, just wire it up.
Some cars with ABS do not allow ABS to engage in 4wd, so there is that for only ABS cars. Ive no idea what car you have really all options. so i List this.
the rear bumper shows a frame cross member different on 4wd 1996 only, not sure what they mean but is clear in the EPC. part catalog photos.
96 is more easy, in ECU / TCM land
that is my first x90 report, based totally off suzuki documents.
your car is 1996, x90
what transmission.? 5speed box 2wd
so you need a 5speed 4wd box,. for sure, to fit any transfer case
the spline match is on rear of transfer case, or the prop shaft you dont own can fit.
The transfer case changed in 96 with new out put spline count, changed. (and for sure prop shafts)
the prop shaft needed is 1996 , shorter shaft. 4wd,
ive now idea what happens with all parts 1994 (say) 5speed, xfr and prop all 1994 fitted to 96 rear axle. no idea at all or
that is all i can find , good luck in your search.
id find a car with 4wd working, first. in 1996 , a different answer then. this is 2019 and many parts hard to find or super expensive.
cheers !!!
but there are lots of 4wd drive part not just a box.
crossmembers. and more. prop shaft front, and new rear.
harness issues, sure.
finding x90 parts is not easy. nor cheap if found.
engine mount and cross member, not the same 4wd
frame is not the same -79e10 = 2wd, frame 79e00 = 4wd, not the same and mounts on it very different.
the transfer case needs to match 96+
the 5speed gear box is not close to same (gears yes, but not much else inside, even shift rails not the same nor output shaft) so 4wd box is needed
and the new rear prop shaft from xfr case to rear
and the new transmission mounts. 4wd,
and the now very rare 4wd front hubs wheel bearing hubs. (or with ABS?)
good luck finding those hubs. (gm has the for huge money)
may key parts not sold by suzuki now,. discontinued..
a front axle main
a front CV axles (easy 3rd party makers)
4wd harnesses (lots of options lots of harnesses there are)
front locking hubs. (axle ends)
some cars with 96+ autotransmission, with missing 4wd switch will not shift right TCM in 96 or PCM newer but is easy to wire up, the switch is there, just wire it up.
Some cars with ABS do not allow ABS to engage in 4wd, so there is that for only ABS cars. Ive no idea what car you have really all options. so i List this.
the rear bumper shows a frame cross member different on 4wd 1996 only, not sure what they mean but is clear in the EPC. part catalog photos.
96 is more easy, in ECU / TCM land
that is my first x90 report, based totally off suzuki documents.
your car is 1996, x90
what transmission.? 5speed box 2wd
so you need a 5speed 4wd box,. for sure, to fit any transfer case
the spline match is on rear of transfer case, or the prop shaft you dont own can fit.
The transfer case changed in 96 with new out put spline count, changed. (and for sure prop shafts)
the prop shaft needed is 1996 , shorter shaft. 4wd,
ive now idea what happens with all parts 1994 (say) 5speed, xfr and prop all 1994 fitted to 96 rear axle. no idea at all or
that is all i can find , good luck in your search.
id find a car with 4wd working, first. in 1996 , a different answer then. this is 2019 and many parts hard to find or super expensive.
cheers !!!
http://www.fixkick.com