|
put my 8v motor back in my tracker won't start
|
02-02-2015, 04:03 PM
So I pulled my 8v motor out of my tracker and had the bottom end rebuilt. TheN I put it back in and went to prime the oil pump and the starter ground was bad and it was making a noise that got higher in pitch then would go away so then it stopped and i fixed the ground and now it cranks and it won't start. The ignition timing is right I even followed the timing writeup on here. I have fuel and good bright spark but it won't start.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
put my 8v motor back in my tracker won't start - by aarontupper - 02-02-2015, 04:03 PM
RE: put my 8v motor back in my tracker won't start - by fixkick - 02-02-2015, 10:17 PM
RE: put my 8v motor back in my tracker won't start - by aarontupper - 02-03-2015, 01:29 AM
RE: put my 8v motor back in my tracker won't start - by fixkick - 02-03-2015, 01:43 AM
RE: put my 8v motor back in my tracker won't start - by aarontupper - 02-03-2015, 04:58 AM
RE: put my 8v motor back in my tracker won't start - by fixkick - 02-03-2015, 05:26 AM
RE: put my 8v motor back in my tracker won't start - by aarontupper - 02-04-2015, 11:21 PM
RE: put my 8v motor back in my tracker won't start - by fixkick - 02-04-2015, 11:41 PM
|
