Rocker Arm Shaft O-ring

[fixkick]

thanks, my EPC is devoid of sizes, great research !!!!

1.9mm (cross section size =CS ) with added x2 to below is full OD size of ring.
12.6mm inside diameter,
that is all we need. to buy any o=ring, next is just material.

not really suzuki parts are only sold by suzuki and yes, any suzuki motorcycle shop has it or can get it, say in 3 days.


id go viton
to buy ring we need the catalog pages for all 1.9mm rings. then find the ID. thats all there is to it. well be in the metric section sure.
my usaorings.com
has horrid selection, of 1.9mm rings. like 10 or less.
1.0mm 1.5. and 2.0 are common,
how ever this might work, it's tight, stretch it on, grease with silicon grease well and may fit. (my best attempt)

(19282) 12.5 MM X 2 MM BN70 METRIC (standard ind. sized)

or viton
16520) 12.5 MM X 2 MM V75 METRIC

http://www.oringsusa.com/catalog/product...=488019282


strike 2
http://www.theoringstore.com/

not and easy ring to find, but does come for free in the Felpro overhaul kit, that is how i got mine, might be in the felpro head gasket kit too.