the mount needs , sonic vibration protection, in rubber. or there will be noise telegraphed to the frame.
2nd gear it an canary gear. it the first synchro to were out. driving in town, lots of up shifts and down shifts to it in town.
seen many 2nds rings with grooves in side worn to sooth and gone. (yours are new, now. so need to break in, with DINO GL4 only) or gl3/4/5 if found.
many report using syn lube make all synchro's baulk.
the magic microphones can help, you can hear it for sure, (if not u-joints) i usually start with u-joints, some feel ok but needles inside are rust buckets
and find the section that is the most loud. this has great value , in diagnosis....
2nd gear it an canary gear. it the first synchro to were out. driving in town, lots of up shifts and down shifts to it in town.
seen many 2nds rings with grooves in side worn to sooth and gone. (yours are new, now. so need to break in, with DINO GL4 only) or gl3/4/5 if found.
many report using syn lube make all synchro's baulk.
the magic microphones can help, you can hear it for sure, (if not u-joints) i usually start with u-joints, some feel ok but needles inside are rust buckets
and find the section that is the most loud. this has great value , in diagnosis....
http://www.fixkick.com