Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Identify Transaxle wiring connections
#1
One of my projects is to get this rebuilt engine to run outside of the car - I plan on putting this engine in my 4x4 buggy. It's a 1.6L 16v from Suzuki Esteem (automatic transaxle), coil-on-plug, distributor-less. Same as the Suzuki Baleno outside North America.

I'm am currently trying to get the harness sorted out and set correctly before I plumb the gas. The current issue is:

- What are these connections? Do I need them to start/run the engine?
#1 - shifter position?
#2 - ?
#3 - ?
#4 - ?

   
   


This is how I plan to get the engine started/running. It's mounted on a stand with radiator, steering and gauge cluster. I have not cut anything significant from the harness, so it's is about 98% of the entire wiring from the car.

   
Reply


Messages In This Thread
Identify Transaxle wiring connections - by Jules - 12-06-2019, 03:27 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)