(08-17-2019, 02:18 PM)hyrific Wrote: I used a gasket as part of my rebuild kit and its leaking oil from the oil pan...…. Lots of little screws and a pain the @$$ to replace. Sure was easy when the engine was out of the car. Should have spent more time making sure I had the gasket right. Looking for any tips to replace the gasket and what gasket I should use to make sure I don't get another leak once I get it back up.
Thanks.
what car,
The g16 ships from that factory with no gasket on the pan, ever, (uses RTV only)
Suzuki sells no gasket for it , ever.
G16 1996 up if you add a gasket the CKP crank sensors is now too high and it fails.
95 and older no problem. with that there is no CKP.
is your car 4wd"
what trans is there, those side clamps to the trans can be a problem. 3sp, 4speed, 5speed?
one of our contributors offered these photos. to do that.
https://fixkick.com/axles/Pan-drop/pandrop.html
http://www.fixkick.com