08-03-2019, 06:25 AM
(08-03-2019, 06:03 AM)fixkick Wrote: LAST CVS LOOKS GOOD, AT KEY OFF 0RPM IS SEE THE BLOCK heat soaked up to 255F , that is super hot. Hot soak temp.
the EFI runs in code 2 , full time expected, so the 02 is happy at , mid point, of its range. all good... no lean that.
I seen no problems in the data just very hot ECT sensor. and the OBD voltage glitches to 9v, line 259 /262 there very odd, beside key off at line 426.
at 39.2 load on engine looks perfect, but hot.
OK, so if its not running lean that may kick up the temps, what could it be?
Coolant flow?? Could I have air in the system? I used an 'air lift' system when filling coolant.
I haven't put on the stant thermostat, I will do that this weekend. and will repeat the process.
Where do I go from here??