Hey all after a little over 500 miles, on new head, I got a code po443 i checked the pages and was reading here http://www.fixkick.com/sensors/EVAP/EVAP96.pdf i did the easiest check which was to check the ohms on the evap canister purge valve, (I am thinking this is the one with two hoses that come off the top of it.)and ohms are supposed to be 28-36 ohms, that passed with 35.3 ohms. i then checked the evap canister purge solenoid, resistance is to be between 25- 30 ohms. (I am thinking this is the one with one hose comeing off of the top and one off the bottom of it) I failed this test with 33.5 ohms. Should I run through the rest of the tests or is this a dead give away that it is my problem. Bill [/i]
1996 geo tracker cami vin# 2CNBE1867T693XXXX 2wd 5sp