Car Repair Forum
Geo tracker ignition switch security screws - Printable Version

+- Car Repair Forum (https://fixkick.com/forum)
+-- Forum: Suzuki (https://fixkick.com/forum/forum-suzuki)
+--- Forum: Sidekick/Tracker (https://fixkick.com/forum/forum-sidekick-tracker)
+--- Thread: Geo tracker ignition switch security screws (/thread-geo-tracker-ignition-switch-security-screws)



Geo tracker ignition switch security screws - digigeek19 - 09-10-2019

I was having trouble removing the security screws that hold on the ignition switch. I eventually got them off, but they aren't exactly in reusable condition. Does anyone know what type and size of screw I'd need for a replacement, and where to get them?
Thanks


RE: Geo tracker ignition switch security screws - fixkick - 09-10-2019

(09-10-2019, 10:27 AM)digigeek19 Wrote: I was having trouble removing the security screws that hold on the ignition switch. I eventually got them off, but they aren't exactly in reusable condition. Does anyone know what type and size of screw I'd need for a replacement, and where to get them?
Thanks

that is normal,  the heads pop off day one installed, by design.
and screw works there , they are metric, of couse.
if you take the screw to any auto store, they have them there, just normal screwss.


off my I/P cluster removal page
12 years ago I wrote this.
Buy  two new  6mm OD   x 20mm    M6-20 pitch 1.0  long allen screws first, and the hex key to match

but might be 8mm,   just take the old screws to the store. 
diameter find then pitch.