+- Car Repair Forum (https://fixkick.com/forum)
+-- Forum: Suzuki (https://fixkick.com/forum/forum-suzuki)
+--- Forum: Sidekick/Tracker (https://fixkick.com/forum/forum-sidekick-tracker)
+--- Thread: Transfer case noise when in Reverse with brake on (/thread-transfer-case-noise-when-in-reverse-with-brake-on)
Pages:
1
2
RE: Transfer case noise when in Reverse with brake on - fixkick - 07-02-2019
the trans adapters from main box to xfr case are the magic that does the fit, 3 main boxes, 3/4/5speed
RE: Transfer case noise when in Reverse with brake on - fixkick - 07-02-2019
the trans adapters from main box to xfr case are the magic that does the fit, 3 main boxes, 3/4/5speed
RE: Transfer case noise when in Reverse with brake on - hyrific - 08-17-2019
(07-02-2019, 04:01 AM)fixkick Wrote: the trans adapters from main box to xfr case are the magic that does the fit, 3 main boxes, 3/4/5speed
Ok so before I purchased a new tranny I got a stethoscope. Turns out it was the catalytic converter right next to the transfer case. So I replaced the cat and all is good.
Glad that worked out.
If you hear a noise check that your cat hasn't started to disintegrate.
Thanks
RE: Transfer case noise when in Reverse with brake on - fixkick - 08-17-2019
(08-17-2019, 02:13 PM)hyrific Wrote:(07-02-2019, 04:01 AM)fixkick Wrote: the trans adapters from main box to xfr case are the magic that does the fit, 3 main boxes, 3/4/5speed
Ok so before I purchased a new tranny I got a stethoscope. Turns out it was the catalytic converter right next to the transfer case. So I replaced the cat and all is good.
Glad that worked out.
If you hear a noise check that your cat hasn't started to disintegrate.
Thanks
thanks for sharing/
mine had the same thing, , the CAT itself had this shield with crack in the shield. (that made noise at odd times)
noise is a very complex thing on any machine and worse on machines that move.
saw one car do the same, and it was a harness clamp on the tranny box, that was undone a bit and the end of the clamp ONLY hit the body, in left turns and only under hard acceleration. took 3 guys on lift to find that, simulating driving and dragging brakes at the same time to simulate loads on the engine.
noise can be , very hard to find.