Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1997 engine missfire
#18
ok more progress
72e40 (is reallya 72E41, the end 1, is newer version, so is of no matter) but 72 means 1997 only, usa Fed, or Canada.
the code 4 means , Manual tranny, 2 or 4 door.
so that means to me, that your CKP is wrong, dead wrong , and the EPC clearly shows one cog fitting all 96-98, G16bs
The EPC flat shows your cog is wrong, for that ECU. my guess you have ESTEEM engine in there. and that is ok? but not with that COG
the ESTEEM ECu is vastly different .

that is an engine swap, buy a new cog and it will run prefect
cog, crank 12630-57B01
1996 to at least 2001 it was used

http://www.oemsuzukiparts.com/parts/inde...eid=214330

if say the PO, swapped in a Canada or USA 1.6L Esteem , model, say 1998 or newer, ITS GOT THE WRONG cog for sure.
the change over happened in 1998 Esteem world. only.
there are some facts and history. The EPC makes that possible.
http://www.fixkick.com
Reply


Messages In This Thread
1997 engine missfire - by MP2 - 10-06-2013, 02:52 PM
RE: 1997 engine missfire - by fixkick - 10-06-2013, 11:29 PM
RE: 1997 engine missfire - by MP2 - 10-07-2013, 12:22 AM
RE: 1997 engine missfire - by fixkick - 10-07-2013, 12:23 AM
RE: 1997 engine missfire - by MP2 - 10-07-2013, 12:28 AM
RE: 1997 engine missfire - by hatchetman - 10-07-2013, 01:51 AM
RE: 1997 engine missfire - by MP2 - 10-07-2013, 02:58 AM
RE: 1997 engine missfire - by fixkick - 10-07-2013, 03:04 AM
RE: 1997 engine missfire - by MP2 - 10-07-2013, 04:55 AM
RE: 1997 engine missfire - by fixkick - 10-08-2013, 02:25 AM
RE: 1997 engine missfire - by MP2 - 10-08-2013, 02:59 AM
RE: 1997 engine missfire - by fixkick - 10-08-2013, 04:26 AM
RE: 1997 engine missfire - by MP2 - 10-08-2013, 05:09 AM
RE: 1997 engine missfire - by fixkick - 10-08-2013, 10:06 PM
RE: 1997 engine missfire - by fixkick - 10-08-2013, 11:17 PM
RE: 1997 engine missfire - by MP2 - 10-09-2013, 01:46 AM
RE: 1997 engine missfire - by fixkick - 10-09-2013, 04:27 AM
RE: 1997 engine missfire - by fixkick - 10-09-2013, 06:50 AM
RE: 1997 engine missfire - by MP2 - 10-09-2013, 01:06 PM
RE: 1997 engine missfire - by fixkick - 10-09-2013, 11:07 PM
RE: 1997 engine missfire - by MP2 - 03-09-2014, 08:45 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)