i just remove that plastic film
then spray water proofing, on the inside of the door card. its not water poof.
keep in mind they made cars for 70 years, with non of that. and was not a problem but the drains need to be free.
if you have door speaker spray the cones with clear paint. bam water proof.
the film only stops the FOG inside door from starting mold on the cheap, hardboard in the door car, this is easy stop, no plastic film at all.
note the p/n for left and right, above. those parts are all different.
3 bolts holding the handle bracket were a pain?
then spray water proofing, on the inside of the door card. its not water poof.
keep in mind they made cars for 70 years, with non of that. and was not a problem but the drains need to be free.
if you have door speaker spray the cones with clear paint. bam water proof.
the film only stops the FOG inside door from starting mold on the cheap, hardboard in the door car, this is easy stop, no plastic film at all.
note the p/n for left and right, above. those parts are all different.
3 bolts holding the handle bracket were a pain?
http://www.fixkick.com