07-02-2013, 01:00 PM
So that is a good thing that there is ticking, on hydraulic lifters I know it goes awya once they fill wiht oil. i went thru the sequence of adjusting several times and checked with .006 and if I could slip a .007 in there I would adjust it so the .007 wouildnt slip in there. I will check with stethoscope and see if I can narrow it down . I am leary of running it down the road for fear of burning valves again hahaha. I' will let you know where I think it is. thanks Jerry. Oh also, no water leaks in the 15 minutes or so that I ran the engine. good also on no gas leaks too. Bill
1996 geo tracker cami vin# 2CNBE1867T693XXXX 2wd 5sp