great questions!
yes, clear water asks funny q;uestions, i guess, they see so many odd swaps they feel compelled to ask the obvious.
lots of pitfalls.
1: green and orange antifreeze , ouch.
2: finding head bolts, are real hard. for 16v, tell clear water all 96 are 16v MPI (multipoint injection, never single point TBI)
3: suzy wants $40+ for bolts. Napa will say they have them but lies, they fit 8v only head, radical different fit, hopeless.
4: ARP makes bolts, but want the next unborn male child. $100 and up.
http://www.fixkick.com/buy-parts.html#head-bolts
rock auto has this, set. i think is the only affordable after maket set.
http://www.rockauto.com/dbphp/x,catalog,...BK530.html
5: felpro is fine stuff. love it,
HS9683PT1 full top end. no injectors seals. on exh. collector donut seal.
http://www.rockauto.com/catalog/moreinfo...cc=1271494
no water pump seal, in above , that is in bottom end kit or separate.
injector seals and cushions, here.
http://www.fixkick.com/INJECTORS/new-seals/seals.html
cheers.!
did old head fail the gas in chambers test >?
leaks out like sieve.?
or is warped.?
sorry just idle curiosity.
we are tired, we did 2 , 60k tune ups and brake purges today, pant pant....
yes, clear water asks funny q;uestions, i guess, they see so many odd swaps they feel compelled to ask the obvious.
lots of pitfalls.
1: green and orange antifreeze , ouch.
2: finding head bolts, are real hard. for 16v, tell clear water all 96 are 16v MPI (multipoint injection, never single point TBI)
3: suzy wants $40+ for bolts. Napa will say they have them but lies, they fit 8v only head, radical different fit, hopeless.
4: ARP makes bolts, but want the next unborn male child. $100 and up.
http://www.fixkick.com/buy-parts.html#head-bolts
rock auto has this, set. i think is the only affordable after maket set.
http://www.rockauto.com/dbphp/x,catalog,...BK530.html
5: felpro is fine stuff. love it,
HS9683PT1 full top end. no injectors seals. on exh. collector donut seal.
http://www.rockauto.com/catalog/moreinfo...cc=1271494
no water pump seal, in above , that is in bottom end kit or separate.
injector seals and cushions, here.
http://www.fixkick.com/INJECTORS/new-seals/seals.html
cheers.!
did old head fail the gas in chambers test >?
leaks out like sieve.?
or is warped.?
sorry just idle curiosity.
we are tired, we did 2 , 60k tune ups and brake purges today, pant pant....
http://www.fixkick.com