Pag oil, type & amount

[Trackerman96]

I also saw the chart you posted and the upper half of it listed pag100 as correct for a Tracker but another site I looked at referred to a TSB that said to change pag 100 to pag 46 when doing a system flush. Anyway, I am going to go with pag 46 since that is what came in my new compressor. Since the evaporator and the hoses will be the only part I reuse after they are flushed, then I don't think that I can go wrong with the pag 46. As for the oil capacity, I have seen the amount listed for an empty system go from a low of 4oz to a high of 6oz. I think that I will go with 6oz since all the research I have done leans closer to 5 1/2 oz.
TM96