03-17-2016, 02:17 PM
OK Fix
took off the intake manifold today (WHAT A JOB THAT IS). Used a piece of the outer shielding from an old choke cable
in a drill motor to clean out the EGR manifold. I felt no resistance. I poured in a mixture of alcohol , Murphy's oil soap and peroxide
(I use this to clean my black powder guns) , ran the choke cable in again , this time it came out a gooy mess.
used a garden hose to flood the manifold and all four EGR jets were spraying a stream of water about 4mm in diameter.
I don't think the EGR jets were plugged .
Almost forgot , what do you use to clean out the EGR tube?
NOW WHAT ???????????
took off the intake manifold today (WHAT A JOB THAT IS). Used a piece of the outer shielding from an old choke cable
in a drill motor to clean out the EGR manifold. I felt no resistance. I poured in a mixture of alcohol , Murphy's oil soap and peroxide
(I use this to clean my black powder guns) , ran the choke cable in again , this time it came out a gooy mess.
used a garden hose to flood the manifold and all four EGR jets were spraying a stream of water about 4mm in diameter.
I don't think the EGR jets were plugged .
Almost forgot , what do you use to clean out the EGR tube?
NOW WHAT ???????????