Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How do I remove heater control panel 89 Tracker?
#1
I've got the top loose by the vents, and bottom loose by the ashtray and lighter, but it is solidly fastened by the heater controls!
Reply
#2
just the panel.
ok the panel is cable controls, has 3 cables, and must be removed first. or disconnected on the ends first.
http://www.acksfaq.com/96-FSM-v1-1a-pdf.htm

the 96 is near same. at this point.
page 14
remove ash tray, then.....

linked off my dash pull page.
controls.
http://www.fixkick.com
Reply
#3
Hi: I had to replace the light behind mine. The stencil snaps out first. You need to get behind it with something thin, like a knife or small flat-head screwdriver. The screws are behind that.
-Hydro
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)