Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
welding a broken clutch pedal back together
#2
as you know....
the pedal breaks for 2 reasons, the cable is bad, (I goes bad inside where no man can see)
the cable inside gets a deep groove, and pinches the internal cable, badly....
or the stock crappy 2 point spot weld fails on pedal. (these two facts help (sick) each other)
Suzuki still sells the pedal. (not sure on GM, which is same but diffr. P/n and is missing im my Geo book.)

last time i checked, 1year ago? they had them.

since you you show fulls spec on car this is easy to p/n exact. 5sp, 4door, (ill answer for non cruise option)
there are 2 numbers, one japan and one CAMI
the CAMI is best number IMO

49810 prefix both
dash 62a52 japan
dash 62AF1 Cami

49810-62AF1 (bingo)
shows here.
http://www.suzukicarparts.com/parts/1995...eid=214820

thanks your welcome, as always...
http://www.fixkick.com
Reply


Messages In This Thread
RE: welding a broken clutch pedal back together - by fixkick - 09-26-2015, 07:47 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)