Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
front seat backrest adjustment
#1
Great site!

Have Suzuki Vitara (sidekick) JLX, 2door, 1992-3, TBI (throttle body injection)
8 valve, 230.000km

Front seat backrest has play.

Need to adjust the front seat backrest (not headrest) I loosen all screws of the seat side trim; I seem to need to get off (encircled in photo) the plastic attached to front seat backrest adjustment lever
Does it come off with force by pulling it forward? (indicated arrow in picture attatched)

Thanks for any help


Attached Files Thumbnail(s)
       
Reply
#2
lift up and pull it straight off, (IIRC)
its a press fit.

not unlike a radio knob of old.
http://www.fixkick.com
Reply
#3
Great. Thanks for your reply

Now knowing it’s a press-fit and with no experience applying a good loosening technique I tried but feared I could end up breaking it.

So ended up tightening the upper bolt of the reclining assembly, inserting a 12mm spanner between the reclining assembly and the seat cover. (Encircled in diagram)

Now front-seat back rest has no play!

Thanks again!


Attached Files Thumbnail(s)
   
Reply
#4
GREAT
Yes,. the plastic handle just pulls off. of you look there is no set screw, so, is pull off. IIRC
cheers
http://www.fixkick.com
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)