Timing belt COVER

[fixkick]

why does that center bolt look wrong on cover.?
why does this cover seem to me, the wrong cover. it's off wrong engine !, (8v?) or a china clone put on or.?

and what about all the other cover bolts. 8 on outside edge and 9th in center
is the crank bolt at 94/ft/lbs torque , that big 17mm bolt.?
C.E.L lamp out? running?no CKP errors>? DTC's


it the water pump pulley not loose, as they do and then belt can ride against cover? seem not, here, seems wrong cover.. (if screws rare all 9 are planted)

the cover fits to the bottom rim of aluminum here. tight. with 4 screws.

http://www.fixkick.com/my96-16v/motor1%20%285%29.JPG

usually it cuts from the inside, at failure.
this is a real 1997 cover, from Suzuki. note the drastic differences.
http://www.fixkick.com/t-belt/16V/mine/no-brainer1w.jpg

the 8v cover is wrong cover. as is G13s.(1989 or older)
all 16v covers are same from 1992 to 1998, same suzuki part number
11390-71c00
part ID 23 seen
here
http://www.suzukicarparts.com/parts/1995...CallOut=23


i do know (the bad guys) sell clones, and clones are crude.