Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Turn signals out after smoke in combo switch
01-27-2017, 10:22 PM (This post was last modified: 01-31-2017 11:38 PM by fixkick.)
Post: #71
RE: Turn signals out after smoke in combo switch
btw, the bulbs for .blink/brake/park (aka tail) all 4 corner of car can short.
the large brass base bulbs 1157? love to short and 10x that if made in china. (not GE or top makers)
the base glue inside is well, junk.
so they short. so if the TAIL/DOME fuse keeps blowing try new bulbs. x5 do not forget the 3rd extra rear brake lamp,up high, it too can short. (bulb)
also left rear look for present or past trailer hitch hacking behind left rear tail lamp assembly, (means remove and look there)

that smoke is overloaded line, in most cases,but can be a vastly worn combo switch, that gets thinner contacts and can no longer do this job.
the wrong fuse on this power feed, will cause this if the line shorts, in all the common ways.
trailer hitch hacks
never run over sized fuses or get damage not wanted. the fuse is for preventing damage,fire ,or smoke,,,

http://fixkick.com/
Visit this user's website Find all posts by this user
Quote this message in a reply
10-05-2017, 02:08 PM
Post: #72
RE: Turn signals out after smoke in combo switch
wrong fuse can lead to worse problems
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)