Turn signals out after smoke in combo switch

[fixkick]

100% tops testing there.
very very good
the Combo is bad
the combo sends power from the combo fuse inputs (1 of 2)
and then sends it to the relay, pin 3, and then the Relay can then pulse the Green wire relay wire.
its failing to do that.
if you take the combo apart, it will be obvious why the green wire is dead. the contacts are bad or the mech. parts that push it are bad.

ok photo 3 shows the cars green blinker wire cut.
so it hit ground and burned up the blinker, combo switch
i told you to inspect all corners of the car first to make sure there is no damage. you failed to do that, and risk burning up a new combo
combo means the combination switch, the switch that does all things, there, in same. (long list)

now we know what is bad, and why
bravo !!!

why not inspect all 4 corners of car. for frayed wires, I see that photo is a double fail, cut and is frayed . both bad.
the wires must not have damage, I sure you know how good wires look, right? like new. no cuts, no burns, no collision damage, not frayed, not crushed nor cut .