Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Turn signals out after smoke in combo switch
#19
for sure no hurry, or me , playing , gawd over names,!
and yes, they are all obscure to all normal folks.

the combo does 2 things, it directs power to the blinker relay
and then takes that pulling output of the relay module and directs it to left or right side of car.
in the case of hazard mode, both sides at once.

Im telling you we can fix this no matter, no hurry and we can , talk back and forth, no problems.
if we run astray no problems we just REDO,

good luck to you !!!




(11-23-2014, 04:29 AM)zukitrek Wrote: Lol!! That was my guess after further reading! I was confusing combo switch with Hazard button(which is missing hence my how in the hell). Lever had to be either signals left or right. Okie. Will do a report back to you. Aye aye sir!!

Well, key on a signalling either side with lever nothing blinks in cluster nor any sound. That was discussed at the beginning, after the smoke event where I told you that fuse was back in but nothing worked. I will do step 6 to get relay out of the way.
http://www.fixkick.com
Reply


Messages In This Thread
RE: Turn signals out after smoke in combo switch - by fixkick - 11-23-2014, 06:12 AM

Forum Jump:


Users browsing this thread: 8 Guest(s)