No crank click sound problem then starts fine

[fixkick]

Dead blinkers.
want to learn to use a cheap volt meter. ?
it will tell you why it fails, it will never lie to you.
its easy, just measure the voltage, its 100% safe too, 12vdc will not hurt you.

dead turns front and rear. both left and right dead, and the hazards are not working so we can not know that , right?
same you broke hazards as that feature makes trouble shooting far more easy.... so we dont have it....
have leather sewing needle for backprobing, 10cents.

we can do the 1 step at at time.
lets do that
meter in hand, set dial to 20vdc range or volts DC if meter autoranges.

meter minus black test lead to body metal, (shiny metal not plastic or just paint)
meter red lead. is your tests next touch the 3 , spots below. attach the sewing needle here to back probe.
keyon,
left blinker lever throw, dash lamp is dead, right>?

see what i did for you here, see all those voltages.
why not check them. with the meter./???????

---

test one.
what is the voltage (keyon blinking) at RELAY pin 3? (yellow-white ) wire,

it must be 12vdc, must.
is it?

we can find the true cause easy, with one $10 meter and one 10cent needle.