Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ignition wire stuck
#1
My #2 ignition wire is stuck in the spark plug well. I mean stuck; I spent several minutes pulling on it and it didn't move one bit (does spin though). Does anyone have any ideas on how to non-destructively remove this wire? I'm doing the t belt, so replacing the wires now is probably a good idea (also 60k), but I don't want to destroy the old ones before I have a replacement.

On a side note, why do the wires need to be replaced at 60k? What makes them go bad?
Reply


Messages In This Thread
Ignition wire stuck - by Sylvanite - 08-17-2014, 11:42 AM
RE: Ignition wire stuck - by fixkick - 08-17-2014, 10:36 PM
RE: Ignition wire stuck - by Sylvanite - 08-19-2014, 10:11 AM
RE: Ignition wire stuck - by fixkick - 08-20-2014, 01:30 AM
RE: Ignition wire stuck - by Sylvanite - 08-21-2014, 05:52 AM
RE: Ignition wire stuck - by fixkick - 08-21-2014, 08:08 AM
RE: Ignition wire stuck - by Sylvanite - 09-28-2014, 06:06 AM
RE: Ignition wire stuck - by fixkick - 09-28-2014, 06:42 AM
RE: Ignition wire stuck - by Sylvanite - 09-28-2014, 07:51 AM
RE: Ignition wire stuck - by fixkick - 09-28-2014, 09:12 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)