A/T 4speed fails, car wont move until hot.

[zukitrek]

Good day sir. Lol, I KNOW you are not blind i was just elaborating on the term you posted before, of course by not being here and actually testing the car. I know is very difficult for you to diagnose
but Im doing my best.
Ok 1 video, RPMS were 800 and although not shown in the video I backed up the screw (increasing rpms) but volts would not change at all. So RPMS were a bit more than 800 then I screwed it back in a bit until landing in 800 again.

Ok, Im gonna do a short commute to my kids school and will try testing the Idle switch.

Thanks again for your time.