Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rhino software and ALDL Cable...WIN!
#20
that can happen (GM USB CABLE)
IF YOU ASK THE MAKER WHO SOLD THE GM CABLE, HE tells you it is not designed to work with any (suzuki/mitsubishi SDL ECU).
but does work 1/2 the time. (try to know that there are no 1000s of buyers here trying that cable and reporting, only a few do, and its hit and miss. for 10 years now. some work some dont

the reason is the GM cable (USB) has weak drivers, there.
we have guy here, in Spain with Santana that the cable works. that is 1 guy, not 1000s.
the cable can be made to work if you play with the pull up resistors on the SDL pin M, to get stronger, VIH signal. (THE ecu MAN ALSO HAVE A resister here too that can vary from ECU to ECU and we have on SUZUKI data on that)


here are the newer pages, google finds them, here.

http://www.rhinopower.org/Rhinoview/Rhinoview.html

The above page has not one word about any cables.
zero.
join his forum and ask for full support, ?
http://rhinopower.activeboard.com/


btw its not just a cable, with wires. not in the least
it has USB to TTL232 drivers, chips and has custom level shifters for the suzuki, SDI pin M.
the levels on the GM device are weak.

if you back up a few posts see my accurate block diagram of the USB and level translater magic.
its not just a lump of plastic there.
http://www.fixkick.com
Reply


Messages In This Thread
RE: Rhino software and ALDL Cable - by fixkick - 09-09-2014, 06:15 PM
RE: Rhino software and ALDL Cable...WIN! - by mpo - 10-09-2014, 12:39 AM
RE: Rhino software and ALDL Cable...WIN! - by mpo - 10-09-2014, 08:08 PM
RE: Rhino software and ALDL Cable...WIN! - by mpo - 10-10-2014, 06:53 PM
RE: Rhino software and ALDL Cable...WIN! - by mpo - 10-11-2014, 07:52 AM
RE: Rhino software and ALDL Cable...WIN! - by fixkick - 04-28-2017, 10:26 PM
RE: Rhino software and ALDL Cable...WIN! - by mpo - 05-04-2017, 12:23 AM
RE: Rhino software and ALDL Cable...WIN! - by mpo - 05-04-2017, 07:24 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)