Login Register

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
timing freeze
#1
91 1.6
When I jump the connector the timing isn't "jumping all over" but if I rev it up it still advances..is that wrong.
Seems like no difference jumped or not. Mark stays same when jumped
No codes..unless one there in the hour before I tried to time it. CEL proves out. Then always off when running...
It starts and runs nice but just need to confirm base timing and my lower balancer is off ( slipped) by 4 degrees..so need to get timing sorted out.
Reply


Messages In This Thread
timing freeze - by barnbiketom - 11-30-2013, 10:55 PM
RE: timing freeze - by fixkick - 12-01-2013, 03:32 AM
RE: timing freeze - by barnbiketom - 12-01-2013, 08:28 AM
RE: timing freeze - by fixkick - 12-01-2013, 11:07 PM
RE: timing freeze - by barnbiketom - 12-02-2013, 06:35 AM
RE: timing freeze - by fixkick - 12-02-2013, 11:25 PM
RE: timing freeze - by barnbiketom - 12-04-2013, 09:12 AM
RE: timing freeze - by fixkick - 12-04-2013, 09:28 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)