01-12-2014, 02:45 AM
your CEL lamp is burned out, emails tells me it's in progress, the fix.
http://www.fixkick.com/power-elect/clust...r-out.html
the CEL can be tested at the DLC in the engine bay , pin 3. using an LED or analog volt meter.
http://www.fixkick.com/CEL/DLC/DiagJump.html#cheat
car stalls cold and hot. (fast right foot saves stalls)
and bogs hot only.
your ISC is dead, not sure why yet?, will wait for ALL DTCs to roll out the CEL (diagmode)
http://www.fixkick.com/power-elect/clust...r-out.html
the CEL can be tested at the DLC in the engine bay , pin 3. using an LED or analog volt meter.
http://www.fixkick.com/CEL/DLC/DiagJump.html#cheat
car stalls cold and hot. (fast right foot saves stalls)
and bogs hot only.
your ISC is dead, not sure why yet?, will wait for ALL DTCs to roll out the CEL (diagmode)
http://www.fixkick.com