Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Timing Issue
#17
(03-28-2020, 10:56 AM)Xoloski Wrote:
(03-24-2020, 08:28 AM)fixkick Wrote: https://www.rockauto.com/en/moreinfo.php...TBag%3D%3D


STANDARD MOTOR PRODUCTS JR144

the timing freeze can be a pain
first make sure 800rpm hot.
make sure turning on AC causes 1000 RPM? does it? that tells you the fast idle controls work. (and ISC works and idle switch not stuck open)

A/C is not charged yet, compressessor will not kick in.
good no 1000 rpm idle and no dead timing freeze jumper (that jumper can fail for up to 9 reasons,) even the steering overload switch shorted can case 1000 RPM. yah,
 this suzuki has very active spark advance at idle , to save  ton fuel. and lower smog and not over stress the CAT too much. thus the freeze.
http://www.fixkick.com
Reply


Messages In This Thread
Timing Issue - by Xoloski - 03-24-2020, 02:22 AM
RE: Timing Issue - by Xoloski - 03-24-2020, 07:23 AM
RE: Timing Issue - by fixkick - 03-24-2020, 08:20 AM
RE: Timing Issue - by Xoloski - 03-28-2020, 10:17 AM
RE: Timing Issue - by Xoloski - 03-28-2020, 10:29 AM
RE: Timing Issue - by Xoloski - 03-28-2020, 10:34 AM
RE: Timing Issue - by fixkick - 03-24-2020, 08:28 AM
RE: Timing Issue - by Xoloski - 03-28-2020, 10:56 AM
RE: Timing Issue - by fixkick - 03-28-2020, 11:31 PM
RE: Timing Issue - by fixkick - 03-24-2020, 08:32 AM
RE: Timing Issue - by Xoloski - 03-24-2020, 11:42 AM
RE: Timing Issue - by fixkick - 03-24-2020, 10:38 PM
RE: Timing Issue - by fixkick - 03-24-2020, 10:57 PM
RE: Timing Issue - by fixkick - 03-28-2020, 10:46 AM
RE: Timing Issue - by Xoloski - 03-28-2020, 11:17 AM
RE: Timing Issue - by fixkick - 03-28-2020, 11:09 PM
RE: Timing Issue - by fixkick - 03-28-2020, 11:15 PM
RE: Timing Issue - by Xoloski - 07-17-2020, 12:22 PM
RE: Timing Issue - by Xoloski - 07-17-2020, 12:30 PM
RE: Timing Issue - by fixkick - 07-17-2020, 09:43 PM
RE: Timing Issue - by Xoloski - 07-17-2020, 11:07 PM
RE: Timing Issue - by fixkick - 07-18-2020, 12:22 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)