Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Have a question about shifter bushing repair
#8
just clean it
lube it , with assemb lube. or gel.
new 27 plastic, it fits tight and ends the sloppy shifts in all cases this is it . fails easy. for sure not lubed.
and twist lock CUP down with #36 screws, loose turn 90deg, CW to lock it down. per manual.
or push it down such that the slots align with #36 holes. and then insert both screws 1 at a time. (i found this more easy.)
http://www.fixkick.com
Reply


Messages In This Thread
RE: Have a question about shifter bushing repair - by fixkick - 12-18-2018, 10:31 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)