Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Have a question about shifter bushing repair
#7
http://www.fixkick.com/tranny/5speed-rebuild.html
this page covers highlights of the job, not the 38 pages here.
the 7 steps are there for disassemble but the reverse is the same, for this housing.

7: Or hold down the CUP, against that strong spring and remove both #36 screws. Bam its off. Do not lose those 2 special screws #36

here is my step 7, and how to do it in reverse depends on how strong your hands are, i found pushing it down and inserting the 2 screws the most easy.
but it is CUP twist locking cap, for sure. you can see the twist log cut outs on the cap easy, and is the biggest hint those.

i OCRd the book, here added now.
7B is 5speed box.

http://ge.tt/6gvplbp2
http://www.fixkick.com
Reply


Messages In This Thread
RE: Have a question about shifter bushing repair - by fixkick - 12-18-2018, 10:28 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)