Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
g16a no injector signal, error code 14
#14
Suzuki in 1992 have a g13b engine from suzuki swift gti, cultus gti, where was a 4 low impedance injectors in full group with one injector driver (http://www.rhinopower.org/ECUs/64E10/64E10.html)
I have 4 high impedance injectors with 4 ohms in line, spi injector is 1,2 ohm,so theoretically it should work in 4 injector full group, but I do not know the opening and closing times of mpi injections
So, maybe i'm wrong.
I will try to find everything from spi and then try to fire it up.
Reply


Messages In This Thread
RE: g16a no injector signal, error code 14 - by likaon - 07-25-2018, 10:43 PM

Forum Jump:


Users browsing this thread: 3 Guest(s)