Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Clunk when coming to a stop
#14
glad you brought the picture in. I still have the #17 bracket, it was the #23 bushings i wanted replaced. The other two brackets, # 12 and 13, are fine, but the bushings in both (#15) are shot. it looks from your schematic that they are removable and not one piece with either #12 or 13. I bought brackets from a private seller not knowing #15 was removable so i figured the entire bracket was bad. i just need to replace part #15 as the rubber is old and shot. i will source parts for a bit and see what i can come up with
Reply


Messages In This Thread
Clunk when coming to a stop - by CSUSBgeochem1 - 06-12-2018, 11:38 PM
RE: Clunk when coming to a stop - by fixkick - 06-13-2018, 12:19 AM
RE: Clunk when coming to a stop - by fixkick - 06-13-2018, 01:58 AM
RE: Clunk when coming to a stop - by fixkick - 06-17-2018, 02:20 AM
RE: Clunk when coming to a stop - by fixkick - 07-03-2018, 11:33 AM
RE: Clunk when coming to a stop - by fixkick - 07-03-2018, 11:35 AM
RE: Clunk when coming to a stop - by fixkick - 07-03-2018, 08:36 PM
RE: Clunk when coming to a stop - by fixkick - 07-03-2018, 08:45 PM
RE: Clunk when coming to a stop - by CSUSBgeochem1 - 07-04-2018, 12:18 AM
RE: Clunk when coming to a stop - by fixkick - 07-04-2018, 12:35 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)