05-18-2018, 07:52 AM
So I have a little bit of am issue but it's probably me overthinking it. If I mark the #1 plugwire, my mark won't be in the same place as the pic you posted. That would be number 2.
I have TDC on firing #1 but I don't want to try crank it until I have it 100% so I don't loose it.
This is how yours looks in the pic, 1 o'clock compared to the mount. This is where I have mine right now at TDC on firing #1
![[Image: CA6_E8_CD5_68_C8_4830_B2_B3_E745_DFFA05_A2.jpg]](https://image.ibb.co/djsPYy/CA6_E8_CD5_68_C8_4830_B2_B3_E745_DFFA05_A2.jpg)
But in this pic I have my finger on #1 spark wire.
![[Image: 92_C3_F9_BD_01_FC_4124_93_A1_8_FA466_AE12_A9.jpg]](https://image.ibb.co/mA7PYy/92_C3_F9_BD_01_FC_4124_93_A1_8_FA466_AE12_A9.jpg)
So do I put the rotor on #1 spark wire at TDC of how you have it in the pic?
I'm sorry if this is stupid of confusing but I'm kind of last
I have TDC on firing #1 but I don't want to try crank it until I have it 100% so I don't loose it.
This is how yours looks in the pic, 1 o'clock compared to the mount. This is where I have mine right now at TDC on firing #1
But in this pic I have my finger on #1 spark wire.
So do I put the rotor on #1 spark wire at TDC of how you have it in the pic?
I'm sorry if this is stupid of confusing but I'm kind of last